Arts & Culture

Why Is the Statue of Liberty Green?

By BodaWiki EditorialPublished Updated 4 min read

In short

The Statue of Liberty is green because its copper skin has naturally oxidized to form a green coating, or patina, according to the National Park Service.[1] It was brown in 1886, and the change took about thirty years.[1] A 1986 X-ray study found the patina is mainly brochantite, a copper sulfate, alongside cuprite that appears to have formed first.[4]

Key facts

Skin
Copper about 2.5 mm (3/32 inch) thick, like two pennies together[1]
Dedicated
28 October 1886, on Bedloe's Island (now Liberty Island)[2][7]
Sculptor and frame designer
Auguste Bartholdi; internal frame by Alexandre-Gustave Eiffel[2][3]
Colour in 1886
Brown, like an American penny (National Park Service)[1]
Time to fully oxidize and form a patina
About thirty years (National Park Service)[1]
Main patina mineral
Brochantite, a basic copper sulfate, over a layer of cuprite[4][5]
Patina thickness (Copper Development Association)
About 0.005 inch[6]
Proposal to paint it (History.com, Snopes)
1906; abandoned amid protests, per History.com[7][8]

What is the Statue of Liberty made of?

The statue's outer skin is copper about 2.5 mm (3/32 of an inch) thick, which the National Park Service (NPS) compares to two American pennies placed together.[1] In 1865 the French political thinker Edouard de Laboulaye proposed that France give the United States a statue representing liberty, and the sculptor Auguste Bartholdi took up the project.[2] The statue was dedicated on 28 October 1886 on Bedloe's Island in New York Harbor, where President Grover Cleveland accepted it as a gift of friendship from France.[2][7]

Under the copper is a frame designed by the engineer Alexandre-Gustave Eiffel, who replaced the first internal designer, Eugène Viollet-le-Duc, after Viollet-le-Duc died in 1879.[3] Eiffel designed the structure around a central pylon 28 m (92 feet) tall and fixed the skin to it with flat metal bars that flex like springs; instead of relying on weight to support the copper, his design used a flexible skeleton.[3] That flexibility lets the statue cope with harbour winds and changes in temperature.[3] Today the internal structure is made of cast iron and stainless steel.[1]

What colour was the statue at first?

According to the NPS, the statue's copper has naturally oxidized to form its green coating, or patina; on completion in 1886 it was more of a traditional brown, like an American penny.[1] History.com, drawing on the Bard College historian Daniel Wortel-London, reports that within its first 15 years the bright copper dulled to a darker brown, and that by 1903 people were noticing green.[7] By 1910, it adds, the statue was half copper-coloured and half blue-green, and about a decade later it was green all over.[7] The NPS says it took about thirty years for the statue to oxidize fully and form a patina.[1] Bartholdi himself reportedly expected the copper to darken to red rather than turn green.[7]

How does copper turn green?

Clean copper is salmon-pink, and outdoors a full patina usually takes several decades to form.[5] A 2019 study by corrosion scientists in Prague describes the process in stages.[5] First, a thin layer of cuprous oxide, known as cuprite, grows on the surface and turns the metal brown or dark brown.[5] Copper ions then react with pollutants in the air, such as sulfur dioxide, nitrogen dioxide, ozone and chloride, to form the green layer.[5] In industrial air the green layer is usually based on copper sulfates, while near the ocean it is based on chlorides.[5] The Copper Development Association, an industry group, puts the colour change down mainly to moisture and corrosive substances in the atmosphere.[6]

On the statue itself, an X-ray study published in 1986, carried out for the NPS as part of the restoration work, found that the patina consisted mainly of brochantite, a basic copper sulfate.[4] Samples from areas more exposed to weather coming in from the harbour also held antlerite, a less stable copper sulfate, which the researchers took as a sign that acid deposition was changing the patina.[4] A piece of skin removed in 1905 was mostly brochantite, while one removed in 1980 showed copper chlorides and antlerite.[4] Both pieces also held cuprite, which appears to have formed before the sulfates, and the 2019 study notes that brochantite grows on top of a cuprite layer.[4][5] The 2019 study says the statue's mix of brochantite and antlerite is probably a result of acidic precipitation in New York Harbor.[5]

Why does the green patina protect the statue?

Unlike rust on iron, a copper patina is a barrier that slows further corrosion, according to the Copper Development Association.[6] The 2019 study describes the finished patina as insoluble.[5] The association puts the statue's patina at about 0.005 inch thick and says it has protected the copper since 1886.[6] History.com makes the same point: the patina protects the metal underneath from corroding.[7] The protection has limits, however; the 2019 study notes that acid rain can harm a patina instead of helping a new one form.[5]

Was there a plan to paint the Statue of Liberty?

The story of a plan to paint the statue rests on History.com and the fact-checking site Snopes, which draw on newspaper reports of the time.[7][8] In 1901 control of the statue had passed from the Lighthouse Board to the US War Department.[2] According to Snopes, a wire story in the Buffalo Evening News on 19 July 1906 discussed a new paint job, because officials feared the spreading green was verdigris, which Snopes describes as a similar but destructive substance.[8] History.com reports that in 1906 there were calls to repaint the statue in its original copper colour and that Congress appropriated $62,000 for the job, but that the project was abandoned amid protests, reported in a newspaper of the time, that painting it would be "sacrilege".[7] Snopes says that a year later The New York Times reported that War Department engineers did not intend to remove the patina, which the paper said had "softened the outlines of the statue and made it beautiful".[8] Wortel-London adds, in History.com's account, that a painted statue would have needed repainting about every 25 years to keep it looking fresh.[7]

The NPS records the first repairs to the copper skin in 1918, and the statue passed to the NPS in 1933.[2] A restoration that began in 1984 replaced the rusted iron armature bars with stainless steel, removed several layers of coatings from the inside of the copper skin and added a new torch covered in gold leaf.[2]

Frequently asked questions

What colour was the Statue of Liberty originally?

When it was completed in 1886 it was more of a traditional brown, like an American penny, according to the National Park Service.[1] History.com reports that it dulled to a darker brown within its first 15 years, and that people began noticing green by 1903.[7]

How long did it take the Statue of Liberty to turn green?

The National Park Service says it took about thirty years for the copper to oxidize fully and form a patina.[1] History.com reports that the statue was half copper-coloured and half blue-green by 1910 and fully green about a decade later.[7]

Is the green patina bad for the statue?

Not according to the Copper Development Association, an industry group, which describes a copper patina as a barrier that slows further corrosion.[6] An X-ray study published in 1986 did find antlerite, a less stable copper sulfate, on the parts most exposed to weather, and its authors linked it to acid deposition.[4]

Why is the Statue of Liberty's torch gold?

The first torch's internal support corroded beyond repair and was removed in 1984; it is now displayed in the park's museum.[1] French artists made a new copper flame gilded in 24K gold, which reflects sunlight by day and is lit by floodlights at night.[1]

Who designed the inside of the Statue of Liberty?

The engineer Alexandre-Gustave Eiffel designed the internal structure after the first designer, Eugène Viollet-le-Duc, died in 1879.[3] His design hangs the copper skin from a 28 m (92 ft) central pylon on flexible metal bars.[3]

Video transcript

Why is the Statue of Liberty green? Its skin is made of copper, and clean copper isn't green at all. So where did the green come from? Here's the surprise. It took about thirty years for the statue to turn fully green. When it was unveiled in 1886, the National Park Service says, it was brown, like an American penny. So was it painted green? No. And the real reason starts with what the statue is made of. That copper skin is thin: about two and a half millimeters, the same as two American pennies placed together. The sculptor was Auguste Bartholdi. And inside, a frame designed by the engineer Alexandre-Gustave Eiffel holds the skin in place, with metal bars that flex like springs. The statue was dedicated in October 1886, on Bedloe's Island in New York Harbor, as a gift from France. According to History.com, within fifteen years the bright copper had dulled to a darker brown. By the early 1900s, people were noticing green. History.com says it was half blue-green by 1910, and green all over about a decade later, though accounts of the exact years differ. So how does copper change color? Clean copper is salmon-pink, like this new flame, made during the statue's restoration in the 1980s. First, a thin layer of copper oxide, called cuprite, grows on the surface and turns the copper brown. Next, the copper reacts with moisture and with pollutants in the air, such as sulfur dioxide, and slowly builds a green layer: the patina. In industrial air it's usually copper sulfates; right by the ocean, often chlorides. A full patina usually takes several decades. What about the statue itself? An X-ray study published in 1986, done for the Park Service during the restoration, found its patina was mostly brochantite, a type of copper sulfate. That might seem odd for a statue surrounded by sea. But sulfates are more stable than chlorides, and a 2019 study says the mix is probably a result of acid rain in New York Harbor. Pieces of skin removed in 1905 and 1980 also held cuprite, which appears to have formed first. And that green layer does a job. Unlike rust on iron, a copper patina is a barrier that slows further corrosion, according to the Copper Development Association, an industry group. So that's why the Statue of Liberty is green. Its copper skin reacted with moisture and pollutants in the air. First it turned a darker brown. Then, over about thirty years, it grew a thin green patina. It isn't paint. It's a layer that grew out of the copper itself, and it shields the metal underneath. And the patina is thin. The copper skin is about two and a half millimeters thick. The association puts the patina at about five thousandths of an inch, a little over a tenth of a millimeter, and says it has protected the statue ever since. The protection has limits. The 1986 study found antlerite, which the study calls a less stable copper sulfate, on parts more exposed to the harbor's weather. The researchers took it as a sign that acid deposition, such as acid rain, was changing the patina. In 1906, there was even talk of painting it. Snopes, citing a newspaper of the time, says officials feared the green was a harmful kind of corrosion. History.com reports that Congress set aside $62,000 for the work, but painting the outside was dropped amid protests that it would be sacrilege. A year later, the New York Times reported that engineers had no intention of removing the patina. Inside, the iron did rust. When a restoration began in 1984, workers replaced the rusted iron armature bars with stainless steel, and added a new torch covered in gold leaf. The original torch was put on display; today it's in the park's museum. So why is the Statue of Liberty green? It started out brown, like a penny. Over about thirty years, its copper skin reacted with the air and grew a thin green patina, mostly copper sulfate, that helps protect the metal underneath.

Sources

  1. [1]Frequently Asked Questions · National Park Service (Statue of Liberty National Monument) · accessed October 8, 2026
  2. [2]Liberty Island: A Chronology · National Park Service (Statue of Liberty National Monument) · accessed October 8, 2026
  3. [3]Alexandre-Gustave Eiffel · National Park Service (Statue of Liberty National Monument) · accessed October 8, 2026
  4. [4]An X-Ray Diffraction Analysis of the Patina of the Statue of Liberty · Powder Diffraction (Cambridge University Press), R. J. Matyi and R. Baboian · accessed October 8, 2026
  5. [5]Artificial Patination of Copper and Copper Alloys in Wet Atmosphere with Increased Content of SO2 · Coatings (MDPI), Bureš et al., University of Chemistry and Technology, Prague · accessed October 8, 2026
  6. [6]Copper Facts · Copper Development Association · accessed October 8, 2026
  7. [7]The Statue of Liberty Wasn’t Always Green · History.com (A&E Television Networks), by Elizabeth Yuko · accessed October 8, 2026
  8. [8]Was the Statue of Liberty Originally a Different Color? · Snopes (Alex Kasprak) · accessed October 8, 2026
Cite this article
APA
BodaWiki Editorial. (2026, October 10). Why Is the Statue of Liberty Green? BodaWiki. https://bodawiki.com/wiki/why-is-the-statue-of-liberty-green
MLA
“Why Is the Statue of Liberty Green?” BodaWiki, 10 Oct. 2026, bodawiki.com/wiki/why-is-the-statue-of-liberty-green.
Chicago
BodaWiki Editorial. “Why Is the Statue of Liberty Green?” BodaWiki. Last modified October 10, 2026. https://bodawiki.com/wiki/why-is-the-statue-of-liberty-green.
  • statue of liberty
  • copper
  • patina
  • chemistry
  • new york