Transportation

Why Do Ships Float?

By BodaWiki EditorialPublished 4 min read

In short

Ships float because water pushes up on the hull with a force equal to the weight of the water the hull pushes aside, a rule known as Archimedes' principle.[2][3] Steel is eight times denser than water, but much of a ship's interior is air, so the ship's average density ends up lower than the water's.[1]

A large grey U.S. Navy cargo and ammunition ship steaming through dark blue open water in the Red Sea, with white foam along its hull and wake and a helicopter flying near its stern under a hazy sky.
Photo: U.S. Navy, Mass Communication Specialist 2nd Class Jason R. Zalasky, 2010. Public domain, via Wikimedia Commons.

Key facts

Archimedes' principle
Upward force equals the weight of the fluid displaced[2][3]
Density of fresh water
1,000 kg/m³[1]
Density of salt water
Around 1,025 kg/m³[1]
Density of steel
8,000 kg/m³, eight times that of water[1]
Weight of a floating ship
Equal to the weight of the water it displaces[1][2]
Load lines made compulsory in Britain
1876 (Merchant Shipping Act)[5]
First international load line convention
1930[6]
Convention in force today
1966 Load Lines Convention (IMO), as amended[1][6]

What is buoyancy?

Water pushes inward, upward and downward on an object placed in it, and because pressure increases with depth, it pushes harder on the bottom of the object than on the top.[3] The difference between those upward and downward forces is called buoyancy.[3] Archimedes' principle gives its size: an object partly or fully submerged in a fluid feels an upward force equal to the weight of the fluid it displaces, or pushes aside.[2][3]

The principle is named after Archimedes, the Greek mathematician from Syracuse in Sicily, who was killed in 212 BC when the Romans captured the city.[1][4] In his work On Floating Bodies he laid down the basic principles of hydrostatics and also studied the stability of floating bodies of different shapes.[4]

Why does a steel ship float when a steel block sinks?

Whether something floats depends on its density, which is how much mass it packs into each unit of volume.[1] Objects less dense than the water around them float, and denser ones sink.[1] Fresh water has a density of 1,000 kilograms per cubic meter and salt water around 1,025, while steel is 8,000, which makes it eight times denser than water.[1]

Density of water and some common materials (kg/m³)
  • Wood (around)700 kg/m³
  • Certain oils (around)850 kg/m³
  • Fresh water1,000 kg/m³
  • Salt water (around)1,025 kg/m³
  • Steel8,000 kg/m³

Source: Gard (Gard News) [1]

That is why a solid steel bar sinks.[1] For a ship, what counts is the density of the whole vessel: its total weight, including cargo, fuel, stores and crew, divided by the outside volume of its hull.[1] Much of a ship's interior is air, so the average of the steel, the other materials and the air can come out lower than the density of water, and ships are designed to achieve that.[1]

The same idea explains how a damaged ship can sink: if the hull is breached, water rushes in and replaces the air, changing the ship's overall density, and depending on how much it changes, the ship may go down.[1]

How much water does a ship displace?

Ships held up in this way are called displacement ships, because they float by displacing their own weight in water.[2] A ship floating at rest in calm water is in balance: its weight pushes down and the buoyant force pushes up with equal strength, or else, as U.S. Naval Academy course notes put it, the ship would sink or fly.[2] The weight acts through the ship's center of gravity, and the buoyant force acts through its center of buoyancy, the center of the hull's underwater volume.[2]

A ship's displacement is the volume of water it pushes aside, and its displacement tonnage is the weight of that water, which equals the actual weight of the ship.[1] Cold, salty water is denser than fresh water, so a ship needs to displace less of it; in warmer, less salty water it has to displace more and sits lower.[1]

What keeps a ship from tipping over?

When wind and water heel a ship over, the shape of its underwater hull changes, so the center of buoyancy moves.[2] In a properly designed ship, the upward buoyant force and the downward weight then act along lines some distance apart, a gap called the righting arm, and this creates a turning effect that rights the ship once the push stops.[2] As the heel increases, the righting arm grows to a maximum and then shrinks until weight and buoyancy line up again; heeling any further capsizes the ship.[2]

Raising the center of gravity shortens the righting arm.[2] If the center of gravity sits above a point called the metacenter, the ship is unstable from the start and keeps rolling as soon as it begins to heel.[2] Empty commercial tankers can end up in this state, and taking on ballast low in the hull lowers the center of gravity again.[2] Liquid moving freely in partly filled tanks, known as free surface, acts like a weight shift and also reduces the righting arm.[2]

What is the Plimsoll line?

Load lines are painted on the side of a ship to show how low it may safely sit in the water.[5] An overloaded ship could sink in heavy seas or rough weather, and in the 19th century overloading and poor repair made some ships so dangerous that they were called "coffin ships".[5] Ships from Venice were marked with a cross as early as the 12th century, but load lines became widespread only in the 19th century.[5]

In 1870 Samuel Plimsoll, a British MP and coal merchant, began investigating ship safety and campaigned in Parliament.[5] The Merchant Shipping Act of 1876 made load lines compulsory, the position of the line was fixed by law in 1894, and from 1906 foreign ships visiting British ports also had to carry one.[5] The basic symbol, a circle with a horizontal line through its center, is now recognized worldwide.[5]

The first International Convention on Load Lines was adopted in 1930, and it has since been replaced by the 1966 Load Lines Convention adopted by the International Maritime Organization.[1][6] The limits are given as freeboards, the safety margin between the deck and the waterline, and the load lines must be marked amidships on each side of the ship together with the deck line.[1][6] Because the water can reach different parts of the mark depending on its temperature, saltiness, season and location, short lines on a vertical bar just forward of the ring show each limit, as U.S. regulations define them:[5][7]

MarkLoad line
SSummer (also the line through the center of the ring)
WWinter
WNAWinter North Atlantic
TTropical
FFresh water in summer
TFTropical fresh water

Frequently asked questions

Why does a steel block sink but a steel ship float?

Steel is eight times denser than water, so a solid steel bar sinks.[1] A ship's density is its total weight divided by the outside volume of its hull, and because much of the interior is air, that average can be lower than the density of water.[1]

What is a ship's displacement?

Displacement is the volume of water a floating ship pushes aside, and displacement tonnage is the weight of that water.[1] Because a floating object displaces its own weight in water, the displacement tonnage is the actual weight of the ship.[1]

Why does a ship sit lower in fresh water than in seawater?

Cold, salty water is denser than fresh water, so a ship has to displace less of it to support its weight; in less salty water it must displace more and sinks lower.[1] Load line marks therefore include a separate fresh water line, and the gap between it and the summer line is the allowance for loading in fresh water.[5][7]

Why do ships capsize?

When a ship heels, its weight and its buoyancy act along slightly different lines, and the distance between them, the righting arm, creates a turning effect that rights the ship.[2] The righting arm grows to a maximum and then shrinks until the two forces line up again, and heeling any further will capsize the ship.[2] A ship whose center of gravity sits above its metacenter is unstable from the start, because the forces help any heel continue instead of resisting it.[2]

Who was Samuel Plimsoll?

Samuel Plimsoll (1824–1898) was a British MP and coal merchant who began investigating ship safety in 1870 and campaigned for load lines to stop ships being overloaded.[5] The Merchant Shipping Act of 1876 made load lines compulsory, and in Britain the mark has become known as the Plimsoll Line.[5]

Sources

  1. [1]Why do ships float? · Gard (Gard News) · accessed October 5, 2026
  2. [2]EN400 Principles of Ship Performance Course Notes (Summer 2020) · U.S. Naval Academy, Department of Naval Architecture and Ocean Engineering · accessed October 5, 2026
  3. [3]Buoyancy: Archimedes Principle · NASA Glenn Research Center · accessed October 5, 2026
  4. [4]Archimedes of Syracuse - Biography · MacTutor History of Mathematics, University of St Andrews · accessed October 5, 2026
  5. [5]Samuel Plimsoll and ship safety · Royal Museums Greenwich · accessed October 5, 2026
  6. [6]International Convention on Load Lines · International Maritime Organization (IMO) · accessed October 5, 2026
  7. [7]46 CFR 42.13-30: Lines to be used with the load line mark · Electronic Code of Federal Regulations (U.S. Government) · accessed October 5, 2026
Cite this article
APA
BodaWiki Editorial. (2026, October 7). Why Do Ships Float? BodaWiki. https://bodawiki.com/wiki/why-do-ships-float
MLA
“Why Do Ships Float?” BodaWiki, 7 Oct. 2026, bodawiki.com/wiki/why-do-ships-float.
Chicago
BodaWiki Editorial. “Why Do Ships Float?” BodaWiki. October 7, 2026. https://bodawiki.com/wiki/why-do-ships-float.
  • ships
  • buoyancy
  • archimedes
  • density
  • naval architecture