Transportation

How Do High-Speed Trains Work?

By BodaWiki EditorialPublished 4 min read

In short

Under the European Court of Auditors' definition, high-speed rail means services with top speeds of at least 250 km/h on new lines built for them, or 200 km/h on conventional lines.[1] Japan's Tokaido Shinkansen has no level crossings; trains draw power from overhead wires, drivers follow speeds shown in the cab, and long noses soften tunnel booms.[2][3][5][9]

A white Tokaido Shinkansen N700S bullet train with a blue stripe running along a fenced track past rows of green tea bushes in Shizuoka, Japan, with overhead power line masts above the track and wooded hills behind.
Photo: MaedaAkihiko, 2024. CC0, via Wikimedia Commons.

Key facts

Definition (European Court of Auditors, 2018)
At least 250 km/h on new lines, or 200 km/h on conventional lines[1]
World's first high-speed railway (per JSME)
Tokaido Shinkansen, Tokyo–Shin-Osaka, opened 1 October 1964[2][3]
Tokaido Shinkansen top speed
210 km/h in 1964; 285 km/h for all trains since March 2020[2][10]
Tokaido Shinkansen track gauge
1,435 mm standard gauge (Japan's older lines use 1,067 mm)[3]
Signalling
In-cab speed display with automatic braking (ATC in Japan, ETCS in Europe)[2][4]
Wheel-on-rail world record (set 2007)
574.8 km/h, V150 TGV, 3 April 2007[6][7]
Maglev speed record (Guinness)
603 km/h, Series L0, 21 April 2015[8]

What counts as high-speed rail?

In a 2018 report on Europe's high-speed network, the European Court of Auditors defines high-speed rail as services with a maximum operating speed of at least 250 km/h on new lines designed for them, or at least 200 km/h on conventional lines.[1] Japan's Tokaido Shinkansen, which began running between Tokyo and Shin-Osaka on 1 October 1964, is described by the Japan Society of Mechanical Engineers as the world's first high-speed railway.[2][3] Its trains first ran at up to 210 km/h; according to the line's operator, JR Central, all of them have run at up to 285 km/h since March 2020.[2][10]

Why are new tracks built for high-speed trains?

Japan's railways had used 1,067 mm track gauge since 1872, but the Tokaido Shinkansen was built as a separate line with the wider 1,435 mm standard gauge, adopted to increase transport capacity; the Japan Society of Mechanical Engineers says this made stable high-speed travel possible.[3] The new line also did away with level crossings and brought in new signalling systems.[3] JR Central calls its safety principle "Crash Avoidance": a track used only by high-speed passenger trains removes the risk of collisions at level crossings, and an automatic train control system stops trains safely.[2]

Raising speed to 270 km/h on the Tokaido line increased the centrifugal force on trains, so JR Central raised the banking of the track, called cant, from a maximum of 180 mm to 200 mm on about a quarter of the line.[2] In 2007 its Series N700 became the first shinkansen to tilt its body so it could take the line's many curves faster.[2] In Europe, the Court of Auditors found that building costs rise with design speed: above 160 km/h, tracks must be at least 4.5 meters apart instead of 4, which makes tunnels wider, and lines shared with freight trains cost more because their gradients and curve radii make routes less flexible and usually need more land.[1] The high-speed lines it audited cost an average of 25 million euros per kilometer, not counting the most expensive tunnel projects.[1]

On the Tokaido line, ballast exchange work once caused most train slowdowns, and a track stabilizer brought into full use in 1997 cut the time lost to them, while a ballast-replacing machine that JR Central developed in 2002 made the work more efficient.[2]

How do high-speed trains get their power?

France's electrically powered TGV trains have been running since 1981.[7] The Tokaido Shinkansen takes its power from overhead catenary, and because Japan's commercial power is 50 Hz east of the Fuji River and 60 Hz to the west, frequency converter substations run the whole line at 60 Hz.[2] JR Central explains that on conventional railways, power reaches the train through contact between contact wires and the train's pantographs, and that high-speed running would make the wire vibrate more and lose contact with the pantograph more often, compromising the supply.[9] For its superconducting maglev, it uses contact-free "inductive power collection" instead.[9]

How do drivers read signals at high speed?

They do not rely on signals beside the track. At shinkansen speeds, JR Central explains, drivers find it hard to check ground signals by eye, and a train cannot stop within the distance a driver can see.[2] Instead, a display in the cab shows the permitted speed, and the Automatic Train Control (ATC) system brakes the train automatically if it goes faster.[2] The third-generation system, ATC-NS, installed on the Tokaido line between 1999 and 2006, has the onboard equipment calculate a braking curve from the train's position, performance and the track alignment.[2] In Europe, the EU's railway agency describes the European Rail Traffic Management System (ERTMS) as a single European signalling and speed control system meant to make national railway systems work together; it includes the European Train Control System (ETCS), a cab-signalling system with built-in automatic train protection.[4]

Why do bullet trains have long noses?

A train entering a tunnel pushes air ahead of it, sending pressure pulses along the tunnel that escape at the far end.[5] On ordinary railways these "micro-pressure waves" cannot be heard, but in high-speed rail tunnels they can emerge as an audible thud, or "sonic boom".[5] According to HS2, the high-speed railway under construction in Britain, the effect was first noticed in 1974 on Japan's then-new Sanyo Shinkansen.[5] It was first tackled with perforated extensions at tunnel entrances, and later with long, streamlined train noses that make the pressure build up more gradually.[5] As of 2025, HS2's design includes portal extensions on all eight of its tunnels where trains enter at more than 140 mph; those at its Chiltern Tunnel have ventilation portholes along one side that let some of the air escape.[5]

What are the fastest train speed records?

TrainTypeSpeedDate
Series L0 (Japan)Maglev, test line603 km/h21 April 2015
V150 TGV (France)Wheels on rails574.8 km/h3 April 2007

The world speed record for a train on rails was set by V150, an experimental TGV of two power cars and three double-deck coaches with 19.6 MW of power, which reached 574.8 km/h on 3 April 2007 on a specially prepared stretch of line east of Paris.[6][7] For the run, the overhead line voltage was raised from 25,000 to 31,000 volts.[7] It beat the 515.3 km/h record that another TGV had set on 18 May 1990.[6][7]

Magnetic levitation (maglev) trains avoid a limit set by wheels: JR Central says the wheels of conventional trains slip when they go too fast, and maglev gets around this by lifting the train above the track.[9] In its superconducting maglev, superconducting magnets on the train and electromagnets on the guideway attract and repel each other, lifting the train about 3.9 inches (about 10 cm, converted for this article) and driving it forward.[9] Guinness World Records lists the Series L0's 603 km/h on 21 April 2015, reached on the Yamanashi test line, as the fastest maglev speed.[8]

Frequently asked questions

When did the first bullet train run?

The Tokaido Shinkansen began operating between Tokyo and Shin-Osaka on 1 October 1964, and the Japan Society of Mechanical Engineers calls it the world's first high-speed railway.[2][3] Its trains first ran at up to 210 km/h.[2]

Can high-speed trains run on ordinary tracks?

The European Court of Auditors' definition includes services on conventional lines with a maximum operating speed of at least 200 km/h, alongside new lines built for at least 250 km/h.[1] It also found that lines mixing passenger and freight trains cost more, because their gradients and curve radii make routes less flexible.[1]

Why do high-speed trains cause booms at tunnel exits?

A train entering a tunnel pushes air ahead, sending pressure pulses that escape at the far end; at high speed they can emerge as an audible thud or 'sonic boom'.[5] Perforated portal extensions and long, streamlined noses make the pressure build up more gradually.[5]

How does a maglev train float?

In JR Central's superconducting maglev, superconducting magnets on the train and electromagnets on the guideway attract and repel each other, lifting the train about 3.9 inches and driving it forward.[9] Because the train is levitated, it avoids the wheel slip that limits the top speed of conventional trains.[9]

Sources

  1. [1]Special Report 19/2018: A European high-speed rail network: not a reality but an ineffective patchwork · European Court of Auditors · accessed October 8, 2026
  2. [2]50 Years of Tokaido Shinkansen History (Japan Railway & Transport Review No. 64, October 2014) · Central Japan Railway Company (JR Central), in Japan Railway & Transport Review (East Japan Railway Culture Foundation) · accessed October 8, 2026
  3. [3]Mechanical Engineering Heritage No. 11: 0-Series Tokaido-Shinkansen Electric Multiple Units · The Japan Society of Mechanical Engineers · accessed October 8, 2026
  4. [4]European Rail Traffic Management System (ERTMS) · European Union Agency for Railways · accessed October 8, 2026
  5. [5]Unique HS2 tunnel portal completed to solve high-speed rail’s ‘sonic boom’ conundrum · HS2 Ltd · accessed October 8, 2026
  6. [6]574,8 km/h: new world rail speed record set at 13h13 on 3 April 2007 (press release) · Alstom · accessed October 8, 2026
  7. [7]TGV breaks rail speed record · Al Jazeera · accessed October 8, 2026
  8. [8]Fastest maglev train · Guinness World Records · accessed October 8, 2026
  9. [9]Principles of the Superconducting Maglev system · Central Japan Railway Company (JR Central) · accessed October 8, 2026
  10. [10]Fact Sheets 2026 · Central Japan Railway Company (JR Central) · accessed October 8, 2026
Cite this article
APA
BodaWiki Editorial. (2026, October 10). How Do High-Speed Trains Work? BodaWiki. https://bodawiki.com/wiki/how-do-high-speed-trains-work
MLA
“How Do High-Speed Trains Work?” BodaWiki, 10 Oct. 2026, bodawiki.com/wiki/how-do-high-speed-trains-work.
Chicago
BodaWiki Editorial. “How Do High-Speed Trains Work?” BodaWiki. October 10, 2026. https://bodawiki.com/wiki/how-do-high-speed-trains-work.
  • high-speed rail
  • trains
  • shinkansen
  • maglev
  • railways