Sports

Why Do Golf Balls Have Dimples?

By BodaWiki EditorialPublished 5 min read

In short

Dimples make a golf ball fly farther. They stir up the thin layer of air hugging the ball, which then clings to the surface longer, shrinking the low-pressure wake behind it and cutting drag to about half that of a smooth ball. With backspin, dimples also help create lift that keeps the ball in the air.[1][2][4]

Close-up of a plain white golf ball on a wooden tee in dewy grass, its shallow round dimples lit from the side by low sun, against a blurred green background.
AI-generated illustration

Key facts

Drag compared with a smooth ball
About half[1][3]
Distance of a smooth ball hit by a pro
About half as far as a dimpled ball (Top-Flite researchers)[1]
Typical number of dimples
300 to 500[1][8]
Average dimple depth
About 0.010 inch (Top-Flite researchers)[1]
Share of lift from dimples
About half, with spin giving the rest (Top-Flite researchers)[1]
Maximum ball weight
1.620 ounces (45.93 g)[5]
Minimum ball diameter
1.680 inches (42.67 mm)[5]
Symmetry rule added
1981 (per Golf Digest)[6]

What happens to the air around a flying golf ball?

The club's impact typically lasts only 1/2000 of a second and sets the ball's speed, launch angle and spin; after that, only gravity and aerodynamics control its flight.[1] The air pushes on the ball in two ways: drag, which acts against its motion, and lift, which acts at right angles to it and usually points upward for a golf ball.[1]

A moving ball has a high-pressure area on its front, and the air flows smoothly over the front before breaking away, or separating, toward the back.[1] Behind the ball it leaves a churning wake of lower pressure, and the bigger that wake, the more drag the ball feels.[1] The thin sheet of air sliding right next to the ball's surface is called the boundary layer, and the point where it leaves the surface marks the start of the wake.[4]

How do dimples reduce drag?

Turbulence usually increases drag, because stirring up the air takes energy away from the ball.[4] Dimples add a little turbulence anyway, in the boundary layer itself, and that turbulent layer clings to the surface, letting the smooth outer airflow follow the ball a little farther around its back before separating.[1][4] The wake shrinks, and a dimpled ball ends up with about half the drag of a smooth one.[1]

The trick works only in a narrow range of flow conditions.[2] NASA's Glenn Research Center explains it with the Reynolds number, the ratio of inertia forces to viscous forces in the flow.[2] A rough ball switches to a turbulent boundary layer at a lower Reynolds number than a smooth one, so there is a small range in which the rough ball has less drag.[2] A golf ball's size and speed fall inside that range, so its rough surface triggers turbulence that would not yet happen on a smooth ball.[2]

A 2006 study in the journal Physics of Fluids looked at how dimples do this, a process its authors said had not been fully investigated.[3] Researchers at Seoul National University tested a 150 mm sphere with 392 dimples, which they described as dynamically similar to a real golf ball that is not spinning.[3] Inside the dimples, the air briefly separated from the surface, became strongly turbulent and then reattached, forming small "separation bubbles".[3] The reattached flow had enough momentum near the surface to overcome the rising pressure toward the rear of the sphere, and drag fell by more than 50% compared with a smooth sphere.[3] To measure where the flow finally broke away, they used a sphere dimpled only on its front half, which they said changed the flow little; there, separation moved back to about 110 degrees from the front of the sphere, compared with about 82 degrees on a smooth sphere.[3] At the lowest speed tested, 5 meters per second, the dimples did not reduce drag at all; the drop came only as the speed increased.[3]

Do dimples help a golf ball stay in the air?

Yes, when the ball has backspin.[1][4] Backspin makes the air pressure under the ball higher than on top, pushing it upward much as an airplane wing does.[1] In an answer Scientific American first posted in 2004, a senior scientist and the director of aerodynamic research at the Top-Flite Golf Company said spin supplies about half of a golf ball's lift and the dimples, which let designers fine-tune the lift force, supply the other half.[1] The University of Illinois physics department adds that dimples increase this upward push, known as the Magnus force, which keeps the ball in the air longer so it travels farther.[4]

The same Top-Flite researchers said a smooth ball hit by a professional golfer would travel only about half as far as a dimpled ball.[1] Most golf balls have between 300 and 500 dimples, they wrote, with an average depth of about 0.010 inch, and a change in depth of just 0.001 inch can radically change a ball's trajectory and distance.[1]

How did golfers discover dimples?

Early golfers used hardwood balls, then from the early 1600s the "featherie," a leather case stuffed with feathers.[7] The gutta-percha ball, or "guttie," made from the sap of certain tropical trees, arrived in 1848.[7] According to a 2012 NPR history of the ball, the first gutties were smooth, but golfers noticed that balls with nicks and scratches tended to fly farther, and soon balls appeared with dimples and other patterns.[7] For many years, a "bramble" pattern of inverted dimples, which made the ball look like a raspberry, was popular.[7]

Smithsonian magazine's 2025 history tells the story differently: it mentions golfers discovering that scuffed balls traveled farther than new ones only after describing Coburn Haskell's wound-rubber ball, first sold in 1901.[8] It pictures a Spalding ball called the Dimple, patented in 1905, as one of the first balls covered in aerodynamic dimples.[8] The two accounts suggest different timings for when dimples first appeared.[7][8]

What do the rules say about golf balls?

Under the Rules of Equipment applied by The R&A and the USGA, the specifications for a golf ball fall into six categories, one of which is spherical symmetry.[5] A ball may weigh no more than 1.620 ounces (45.93 grams), and its diameter must be at least 1.680 inches (42.67 millimeters).[5] There is no minimum weight and no maximum size.[5] The ball also must not be designed, made or intentionally modified to behave differently from a spherically symmetrical ball.[5]

According to a 2011 Golf Digest article, the symmetry rule was added in 1981 in direct response to the original Polara, a ball introduced in 1977 that the USGA eventually ruled illegal for tournament play.[6] The company sued the USGA, which eventually agreed to pay a settlement of $1.4 million.[6] The article covered the Polara's re-introduction and said the new ball's asymmetrical dimple pattern was designed so that, lined up with its arrow toward the target, it would hook or slice far less than other balls.[6]

Frequently asked questions

Would a smooth golf ball go farther?

No. Two researchers at the Top-Flite Golf Company wrote in Scientific American that a smooth ball hit by a professional golfer would travel only about half as far as a dimpled ball.[1] At a golf ball's size and speed, a rough surface has less drag than a smooth one, so the dimpled ball flies farther.[2]

How many dimples does a golf ball have?

Most golf balls have between 300 and 500 dimples, with an average depth of about 0.010 inch.[1][8] The depth matters: a change of just 0.001 inch can radically change how a ball flies and how far it goes.[1]

Do dimples affect lift as well as drag?

Yes. According to researchers at the Top-Flite Golf Company, spin provides about half of a golf ball's lift, and the dimples provide the other half by letting designers fine-tune the lift force.[1] The extra lift keeps the ball in the air longer, so it travels farther.[4]

Are there rules about golf ball dimples?

Yes. The Rules of Equipment say a ball must not be designed, made or intentionally modified to have properties that differ from those of a spherically symmetrical ball.[5] According to Golf Digest, this rule was added in 1981 in direct response to the Polara, a ball introduced in 1977; a later version of the Polara uses an asymmetrical dimple pattern meant to cut hooks and slices.[6]

When did golf balls first get dimples?

Accounts differ. According to NPR, golfers in the era of the gutta-percha ball, introduced in 1848, noticed that nicked and scratched balls tended to fly farther, and dimples and other patterns soon followed.[7] Smithsonian magazine names a Spalding ball called the Dimple, patented in 1905, as one of the first with aerodynamic dimples.[8]

Sources

  1. [1]How do dimples in golf balls affect their flight? · Scientific American · accessed October 17, 2026
  2. [2]Drag of a Sphere · NASA Glenn Research Center (Beginner's Guide to Aeronautics) · accessed October 17, 2026
  3. [3]Mechanism of drag reduction by dimples on a sphere · Physics of Fluids 18, 041702 (2006); Jin Choi, Woo-Pyung Jeon and Haecheon Choi, Seoul National University (copy hosted by UC Davis) · accessed October 17, 2026
  4. [4]Dimples on a Golf Ball · University of Illinois Urbana-Champaign, Department of Physics (Physics Van) · accessed October 17, 2026
  5. [5]Rules of Equipment, Part 4: Conformance of Balls · The R&A · accessed October 17, 2026
  6. [6]Polara: The most defiant ball in golf · Golf Digest · accessed October 17, 2026
  7. [7]Feathers And Rubber Bands: A Golf Ball Story · NPR · accessed October 17, 2026
  8. [8]Over 600 Years, the Golf Ball Has Evolved From a Primitive Wood Sphere to a Smart Ball With Cutting-Edge Sensors · Smithsonian Magazine · accessed October 17, 2026
Cite this article
APA
BodaWiki Editorial. (2026, October 19). Why Do Golf Balls Have Dimples? BodaWiki. https://bodawiki.com/wiki/why-do-golf-balls-have-dimples
MLA
“Why Do Golf Balls Have Dimples?” BodaWiki, 19 Oct. 2026, bodawiki.com/wiki/why-do-golf-balls-have-dimples.
Chicago
BodaWiki Editorial. “Why Do Golf Balls Have Dimples?” BodaWiki. October 19, 2026. https://bodawiki.com/wiki/why-do-golf-balls-have-dimples.
  • golf
  • golf ball
  • aerodynamics
  • drag
  • physics